(M1)OMRON CJ1W-ID211 DC Input Unit (24 VDC, 16 Points)

CJ1W-ID211 DC Input Unit (24 VDC, 16 Points)ON Response Use 24-VDC, 100-VAC, and 200-VAC model

 CJ1W-ID211 DC Input Unit (24 VDC, 16 Points)

Name	16-point DC Input Unit with Terminal Block
Model	CJ1W-ID211
Rated Input Voltage	24 VDC
Rated Input Voltage Range	20.4 to 26.4 VDC
Input Impedance	3.3 kΩ
Input Current	7 mA typical (at 24 VDC)
ON Voltage/ON Current	14.4 VDC min./3 mA min.
OFF Voltage/OFF Current	5 VDC max./1 mA max.
ON Response Time	8.0 ms max. (Can be set to between 0 and 32 ms in the PLC Setup.) *1
OFF Response Time	8.0 ms max. (Can be set to between 0 and 32 ms using PLC Setup) *1
Number of Circuits	16 (16 points/common, 1 circuit)
Number of SimultaneouslyON Points	100% simultaneously ON (at 24 VDC) (Refer to the following illustration.)
Insulation Resistance	20 M Ω between external terminals and the GR terminal (100 VDC)
Dielectric Strength	1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of10 mA max.
Internal Current Consumption	80 mA max.
Weight	110 g max.
Circuit Configuration
Terminal Connections	Polarity of the input power supply can be connected in either direction.

*1.The ON response time will be 20 μs maximum and OFF response time will be 400 μs maximum even if the response time are set to 0 ms due to internal element delays.

*2.Terminal numbers A0 to A8 and B0 to B8 are used in this datasheet, but they are not printed on the Unit

(M1)OMRON CJ1W-ID211 DC Input Unit (24 VDC, 16 Points)